Sensors

Approx. Rs 35.00 / PieceGet Latest Price

SOUND SENSOR (HW-484)                                                                                                                                                            
KY-025 DRY REED PIPE MODULE 

Approx. Rs 140 / PieceGet Latest Price

Features:This is a4.8-46V, 2A Dual Motor Controller. Its performance has been improved greatly. It can bear large current due to increased heat sink dissipation. It is easy to control, using LGS's outstanding high-power motor driver chip, the L298N. This chip allows for direct drive of two bi-directional DC motors, and incorporates high-speed short diodes for protection.
Specifications:• The logic part of the input voltage: 6 ~ 12V• Driven part of the input voltage Vs: 4.8~46V• The logical part of the work current Iss: 36mA• Drive part of the operating current lo: 2A• Maximum power dissipation: 25W (T = 75 degree Celsius)• Control signal input level:• High level: 2.3V = Vin = Vss• Low:-0.3V = Vin = 1.5V

Approx. Rs 25 / PieceGet Latest Price

HW-201 is the 100mm renge of IR sensor. Its widely used for hand sanitizer as well as for sanitizer chember too. Supply: 5 vdc Pin configuration Vcc: + 5vdc Gnd: - 5vdc Out: used for switching on relay or transister etc.

Approx. Rs 35.00 / PieceGet Latest Price

A sound sensor is a device that emits sound waves into the environment and records the echoes. It then converts these echoes into electrical signals. A sound sensor is a device that can detect sound waves and records alterations in the environment caused by sound waves affecting its sensor components.

Product Price :Get Latest Price

DFRduino Mega 2560
Features:                                                                                                                                                                                               The Arduino Mega is a microcontroller board based on the ATmega1280. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTS (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.                                                                                                                                                                                                                   Specifications :• ATmega2560 microcontroller• Input voltage - 7-12V• 54 Digital I/O Pins (14 PWM outputs)• 16 Analog Inputs• 256k Flash Memory• 16Mhz Clock Speed

Product Price :Get Latest Price

Product Details:

Features: This is another great LCD Shield from ThinnkWare. With the limited pin resources, your project may be out of resources using normal LCD shield. With this I2C interface LCD module, you only need 2 lines (I2C) to display the information. If you already have I2C devices in your project, this LCD module actually cost no more resources at all. Fantastic for Arduino based project. Content:• LCD Shield (I2C)• 16*2 LCD

Product Price :Get Latest Price

DTMF Module
Features:
DTMF modules help you to control your robot by using your cellphone / Mobile.
Mobile must support AT commands.

Product Price :Get Latest Price

3.0V/3.3V Adjustable Microproc